Hyundai Elantra CN7 Quiz

Intake Manifold - Removal

In this manual: Intake Manifold - Removal
Repair and Maintenance Manual for Hyundai Elantra — 0General Information — 0Engine - Mechanical (DOHC 1.8L/2.0L) — 0Engine - Mechanical (DOHC 1.6L) — 0Engine Electrical Equipment — 0Emission Control System — 0Fuel system — 0Clutch — 0Transmission — 0Wheel Drive Shaft and Axle — 0Suspension — 0Steering — 0
~1min read


INTAKE MANIFOLD - COMPONENTS

REMOVAL

1. Снимите шумозащитный кожух двигателя.

1. Remove the engine cover.

2. Disconnect the intake air hose from the throttle body.

3. Disconnect the accelerator pedal cable.

4. Disconnect the positive crankcase ventilation (PCV) hose and the brake booster vacuum hose.

5. Отсоедините вакуумные шланги, разъем жгута проводов сервопривода регулятора

5. Disconnect the vacuum hoses, the idle speed control servo wiring harness connector, and the throttle position sensor wiring harness connector.

6. Before disconnecting the high-pressure fuel hose from the fuel rail, relieve the residual pressure from the high-pressure fuel lines to prevent fuel spray.

7. Remove the intake manifold bracket.

8. Remove the intake manifold assembly and gasket.

9. Disconnect the fuel injector wiring harness connector.

10. Снимите топливный коллектор вместе с форсунками.

10. Remove the fuel rail together with the injectors.

Be careful not to drop the injectors when removing the fuel rail.

Test yourself

A quick Hyundai Elantra CN7 quiz: every answer comes with an explanation and a link to the manual page.