Hyundai Elantra CN7 Quiz

Flywheel (MT) or Drive Plate (AT)

In this manual: Flywheel (MT) or Drive Plate (AT)
Repair and Maintenance Manual for Hyundai Elantra — 0General Information — 0Engine - Mechanical (DOHC 1.8L/2.0L) — 0Engine - Mechanical (DOHC 1.6L) — 0Engine Electrical Equipment — 0Emission Control System — 0Fuel system — 0Clutch — 0Transmission — 0Wheel Drive Shaft and Axle — 0Suspension — 0Steering — 0
~1min read
0408012016020013096N·mlb·ft
Tightening torque found on this page


FLYWHEEL (MT) OR DRIVE PLATE (AT)

REMOVAL

1. Remove the transaxle and clutch.

2. Remove the flywheel.

INSPECTION

1. Check the flywheel contact surface with the clutch disc for uneven wear or damage. Replace the flywheel if the surface is damaged or has significant wear.

2. Measure the runout of the flywheel contact surface with the clutch disc.

Standard value:

Flywheel runout: 0.1 mm 3. Check the flywheel ring gear for damage, cracks, and significant wear, and replace it if necessary.

INSTALLATION

Install the flywheel assembly and tighten the mounting bolts to the specified torque.

Torque:

Flywheel bolt: 120 - 130 N·m

Test yourself

A quick Hyundai Elantra CN7 quiz: every answer comes with an explanation and a link to the manual page.