Alternator - Removal

ALTERNATOR - COMPONENTS

REMOVAL

1. Disconnect the wire from the negative (-) battery terminal. Disconnect the radiator fan connector and the A/C condenser fan connector.

2. Remove the bolts securing the radiator supports.

3. Loosen the adjusting bolt on the alternator adjusting bracket and remove the lock bolt.

Then raise the vehicle.

4. Disconnect the alternator connector and disconnect the wire from the alternator "B" terminal.

5. Remove the alternator drive belt. Remove the nut and bolt of the alternator pivot mount.

Then lift the radiator and remove the alternator assembly.

1. Pulley

2. O-ring.

3. Rotor assembly

4. Rear bearing

5. Bearing retainer

6. Front alternator bracket

7. Front cover

8. Stator

9. Plate

10. Voltage regulator and brush holder

11. Brush

12. Brush spring

13. Dust seal ring

14. Rectifier assembly

15. Rear alternator bracket