Mode Selection

The mode selection button controls the airflow direction through the ventilation system.

The airflow outlets are changed as follows:

Airflow is directed to the upper body and face. In addition, each outlet can be adjusted to direct the air flowing out of the outlet.

Airflow is directed to the face and floor.

Most of the airflow is directed to the floor and windshield, with a small amount directed to the side window defrosters.

Most of the airflow is directed to the floor, with a small amount of air directed to the windshield and side window defrosters.

Defrost level (A)

Most of the airflow is directed to the windshield, with a small amount of air directed to the side window defrosters.

Instrument Panel Vents

The vents can be opened or closed individually using the adjustment ring. To close a vent, turn it to the left (rear: down) to the maximum position. To open a vent, turn it to the right (rear: up) to the desired position.

In addition, you can adjust the direction of airflow from these vents using the vent control lever, as shown in the illustration.