Rear Combination Lamp Bulb Replacement

Enter

(1) Stop/Tail Lamp
(2) Turn Signal Lamp
(3) Back-up Lamp
(4) Side Marker Lamp

Type B

(1) Stop/Tail Lamp
(2) Turn Signal Lamp
(3) Back-up Lamp
(4) Side Marker Lamp

Rear Turn Signal Lamp

Enter

1. Open the trunk lid.

2. Open the service cover.

3. Remove the socket from the assembly by turning it counterclockwise until the tabs on the socket align with the slots in the assembly.

4. Remove the bulb from the socket by pushing it in and turning it counterclockwise until the tabs on the bulb align with the slots in the socket. Pull the bulb out of the socket.

5. Install the new bulb by inserting it into the socket and turning until it locks in place.

6. Install the socket assembly by aligning the tabs on the socket with the slots in the assembly. Insert the socket into the assembly and turn the socket clockwise.

7. Install the service cover by inserting it into the service hole.

Type B

If the LED lamp does not work, have the vehicle inspected by an authorized HYUNDAI dealer.

Back-up Lamp

Enter

1. Open the trunk.

2. Loosen the trunk lid fixing screw, then remove the trunk lid cover.

3. Remove the socket from the assembly by turning it counterclockwise until the tabs on the socket align with the slots in the assembly.

4. Remove the bulb by pulling it straight out.

5. Install the new bulb by inserting it into the socket and turning until it locks in place.

6. Install the socket assembly by aligning the tabs on the socket with the slots in the assembly. Insert the socket into the assembly and turn the socket clockwise.

7. Install the trunk lid cover by pressing the screw in.

Type B

If the LED lamp does not work, have the vehicle inspected by an authorized HYUNDAI dealer.

Stop and Tail Lamp

If the lamp does not work, have the vehicle inspected by an authorized HYUNDAI dealer.