Headlight Aiming

1. Inflate the tires to the specified pressure and remove all loads from the vehicle except the driver, spare tire and tools.

2. The vehicle must be parked on a level surface.

3. Draw a vertical line (passing through the center of the headlights) and a horizontal line (passing through the center of the bulbs) on the screen.

4. Make sure the headlights and battery are operating normally, and aim the headlights so that the brightest part of the beam illuminates the horizontal and vertical lines.

5. To aim the low beam (and high beam) left or right, turn screwdriver (2) clockwise or counterclockwise. To aim the low beam (and high beam) up or down, turn screwdriver (1) clockwise or counterclockwise.