Rear Combination Lamp Bulb Replacement

5-door vehicle

3-door vehicle

(1) Tail lamp
(2) Stop lamp and tail lamp
(3) Turn signal
(4) Rear fog lamp (if equipped)
(5) Back-up lamp

1. Open the tailgate.

2. Loosen the lamp assembly mounting screws using a Phillips screwdriver.

3. Remove the rear combination lamp assembly from the vehicle body.

4. Remove the socket from the assembly by turning it counterclockwise until the socket tabs align with the assembly housing.

5. Remove the bulb from the socket by pushing it in, then turning it counterclockwise until the bulb tabs align with the socket housing. Pull the bulb out of the socket.

6. Insert the new bulb into the socket, turning it until it locks in place.

7. Place the socket into the lamp assembly so that the socket tabs align with the slots in the housing. Insert the socket into the housing, then turn it clockwise.

8. Install the lamp assembly on the vehicle body.