Trip Computer

The trip computer is a microcomputer-controlled driver information system that displays information related to driving.

Information

Some driving information stored in the trip computer (such as average vehicle speed) is reset if the battery is disconnected.

Trip Modes

To change the trip mode, toggle the " , " switch on the steering wheel.

Fuel Economy

Average Fuel Economy (1)

• The average fuel economy is calculated based on the total distance driven and the fuel consumed since the last average fuel economy reset.
• The average fuel economy can be reset either manually or automatically.

Manual Reset

To manually reset the average fuel economy, press and hold the [OK] button on the steering wheel for more than 1 second while the average fuel economy is displayed.

Automatic Reset

To automatically reset the average fuel economy after refueling, select the "Auto Reset Fuel Economy" mode in the User Settings menu on the LCD display.

- After ignition: The average fuel economy will reset automatically whenever 4 hours have passed after the ignition is turned OFF.
- After refueling: The average fuel economy will reset automatically when driving at a speed above 1 km/h after adding 6 liters (1.3 gallons) of fuel or more.

Information

Average fuel economy may be inaccurate when the vehicle is driven less than 0.19 mile (300 meters) after the engine Start/Stop button is pressed.

Instant Fuel Economy (2)

• This mode displays the instant fuel economy over the last few seconds when the vehicle speed is greater than 6.2 mph (10 km/h).

Trip Information Display

This display shows the accumulated driving distance (1), average fuel economy (2), and total driving time (3).

Information is accumulated from the last reset.

To manually reset the information, press and hold the OK button while viewing the accumulated driving information. The trip distance, average fuel economy, and total driving time will be reset simultaneously.

Accumulated driving information will continue to be recorded while the engine is running (for example, when the vehicle is moving or stopped at a traffic light).

Information

The vehicle must be driven at least 0.19 mile (300 meters) after the last ignition key cycle before the average fuel economy is recalculated.

Trip Info Display

This display shows the trip distance (1), average fuel economy (2), and total driving time (3).

Information is accumulated for each ignition cycle. However, when the engine has been turned off for 4 hours or longer, the trip information display will be reset.

To manually reset the information, press and hold the OK button while viewing the trip information. The trip distance, average fuel economy, and total driving time will be reset simultaneously.

Driving information will continue to be recorded while the engine is running (for example, when the vehicle is in traffic or stopped at a traffic light).

Information

The vehicle must be driven at least 0.19 mile (300 meters) after the last ignition key cycle before the average fuel economy is recalculated.

Digital Speedometer

This message shows the vehicle speed (km/h, mph).

Urea Level Sensor

This mode displays the amount of remaining urea solution in the urea solution tank.