Defrosting and Defogging the Windshield

WARNING

Windshield Defroster

Do not use or Do not use the cooling mode in extremely humid weather. The difference between the outside air temperature and that of the windshield may cause the outer surface of the windshield to fog up, impairing visibility. In this case, set the mode selection knob or button to position and the fan speed control knob or button to a lower speed.

• To defrost the windshield quickly, set the temperature control knob to the highest temperature setting and the fan speed control knob to maximum fan speed. Select the front defroster button on the climate control display. After the engine warm-up period, warm air will be directed to the windshield.
• If you want warm air on the floor while defrosting or defogging, set the mode to the floor defrost position.
• Before driving, remove all snow and ice from the windshield, rear window, outside rearview mirrors, and all side windows.
• Clear snow and ice from the hood and the air intake grille under the hood to improve the efficiency of the heater and de-icer and reduce the likelihood of fogging on the inside of the windshield.

Information

If engine temperature is still low after starting, it may take a short period of engine warm-up before the ventilation airflow becomes warm or hot.