RCCW (Rear Cross-Traffic Collision Warning)

The Rear Cross-Traffic Collision Warning function monitors approaching traffic from the left and right sides of the vehicle when the vehicle is moving in reverse.

Operating Conditions

To operate:

Type A Cluster

Go to User Settings → Driver Assistance → Rear Collision Warning and select Rear Cross-Traffic Collision Warning on the LCD display.

Type B Cluster

Go to User Settings → Driver Assistance and select Rear Cross Traffic Warning on the LCD display.

The system will turn on and stand by for activation. The system activates when the vehicle speed is below 10 km/h and the shift lever is in R (Reverse).

If the function is not selected on the instrument cluster, the function will be deactivated.

Information

• The last selected setting (ON or OFF) of RCCW remains in the system.
• The system activates when the vehicle speed is below 10 km/h and the shift lever is in R (Reverse).
• The detection range of RCCW (Rear Cross-Traffic Collision Warning) is approximately 1 ft ~ 65 ft (0.5 m ~ 20 m) toward both sides of the vehicle.

An approaching vehicle will be detected if its speed is within 2.5 ~ 22.5 mph (4 km/h ~ 36 km/h).

Note that the detection range may vary under certain conditions. As always, use caution and pay close attention to your surroundings when driving in reverse.