System Setting and Activation

System Settings

• The Driver Attention Warning (DAW) system is set to OFF when your vehicle is first delivered from the factory.
• To activate the Driver Attention Warning (DAW) system, turn the engine on, then select "User Settings" → "Driver Assistance" → "Driver Attention Warning" → "High Sensitivity/Normal Sensitivity" on the LCD display.
• The driver can select the Driver Attention Warning (DAW) system mode.
  - High Sensitivity: The DAW system warns the driver of fatigue or inattentive driving earlier than Normal mode.
  - Normal Sensitivity: The DAW system warns the driver of fatigue or inattentive driving.
  - Off: The DAW system is turned off.
• The DAW system setting will be retained as selected when the engine is restarted.

Driver Attention Level

■ System Off

■ Attentive Driving

• The driver can check driving conditions on the LCD display. The DAW screen will appear when you select the Assist mode tab () on the LCD display if the system is activated. (For more details, refer to "LCD Modes" in chapter 3.)
• The driver attention level is displayed on a scale from 1 to 5. The lower the number, the less attentive the driver.
• The number decreases when the driver does not take a break for a certain period of time.
• The number increases when the driver drives attentively for a certain period of time.
• When the driver turns on the system while driving, the "Last Break Time" and level are displayed.

Take a Break

• The message "Consider taking a break" appears on the LCD display and a warning sounds to suggest the driver take a break when the driver's attention level is below 1.
• The Driver Attention Warning (DAW) system does not suggest that the driver take a break when total driving time is less than 10 minutes.

CAUTION

While other warning sounds, such as the unbuckled seat belt warning, operate and override the DAW warning system, DAW warning sounds may not be heard.