Cluster Ionizer Repair Procedures

Inspection

1. Press the MODE switch more than 4 times within 2 seconds while pressing the OFF switch at the same time.

   Display	Description of Malfunction
   00	Normal
   44	Cluster Ionizer Generator Malfunction

   
   * For the diagnostic procedure, refer to the DTC Chart.

Diagnosis Using GDS

1. 1
   The heating, ventilation, and air conditioning system faults can be quickly diagnosed using the Global Diagnostic System (GDS). ※ The GDS provides the following information: (1) Self-diagnosis: Check and display of diagnostic trouble codes (DTC). (2) Current data: Check the input/output status of system data. (3) Active test: Check the operating status of the system. (4) Additional functions: Other controls such as system option and zero point adjustment.
2. 2
   Select "Vehicle Model" and the system to be checked to inspect the vehicle with the tester.
3. 3
   Select the "Current Data" menu to check the current input/output data status. The input/output data for the sensors related to the Ionizer Cluster can be checked.

   

Replacement

1. 1
   Disconnect the negative (-) battery terminal.
2. 2
   Remove the glove box housing cover. (Refer to Body - "Glove Box Housing Cover")
3. 3
   Remove the side garnish on the passenger side (A).

   

4. 4
   Disconnect the connector (A) and remove the passenger side side panel after loosening the mounting screws, then remove the temperature control actuator (B).

   

5. 5
   To install, reverse the removal procedure.