Door Locks from Outside the Vehicle

Mechanical Key

[A]: Unlock, [B]: Lock

First, pull the outside door handle (1) and press the hook (2) located inside the outside door handle with the mechanical key. Then remove the cover (3) and lower the cover down so it is not damaged.

NOTICE

Be careful not to damage the cover when removing it or when placing it after removal.

After removing the cover, turn the key toward the front of the vehicle to unlock, and toward the rear of the vehicle to lock.

If you lock the driver's door with the mechanical key, the driver's door will unlock. If you unlock the driver's door with the mechanical key, you can open and close only the driver's door.

Once the doors are unlocked, they can be opened by pulling the door handle. When closing the door, push the door with your hand. Make sure the doors are securely closed.

Remote Key

To lock the doors, press the Door Lock button (1) on the remote key.

Press the door unlock button (2) on the remote key to unlock the driver's door. If the door unlock button on the remote key is pressed again within four seconds, all doors will unlock.

Once the doors are unlocked, they can be opened by pulling the door handle. When closing the door, push the door with your hand. Make sure the doors are securely closed.

Smart Key

Press the button on the outside driver's door handle while carrying the smart key, or press the door unlock button on the smart key, and the driver's door will open.

If the button on the front outside passenger's door is pressed, all doors will unlock.

Once the doors are unlocked, they can be opened by pulling the door handle.

When closing the door, push on the door with your hand. Make sure the doors are securely closed.

Information

• In cold and humid climates, the door lock and door mechanisms may not operate properly due to freezing conditions.
• If the door is locked/unlocked several times in quick succession with either the vehicle key or the door lock switch, the system may stop operating temporarily to protect the circuit and prevent damage to system components.
• The two-stage unlock setting can be changed in the User Settings mode on the instrument cluster.