Phone Setup

All Bluetooth® related commands can be given by voice or manually.

- Voice command:

1. Press the button.
2. Say "Setup".

- The system will announce the available commands.
1) Connect phone
2) Select phone
3) Delete phone
4) Change priority
5) Deactivate Bluetooth
- To skip the information message, press the button again, then a beep will sound.

- Manual operation:

1. Press the button, to enter SETUP mode.
2. Turn the knob(TUNE), select "PHONE", then press the knob.

3. Turn the knob(TUNE), select the desired item, then press the knob.

• Pairing a phone

To make the Bluetooth® functions available, the phone and the system must be paired (registered with each other). The system can pair with up to five phones.

The pairing procedure differs for each phone model. Before attempting to pair the phone, read the relevant instructions in the phone's owner's manual.

Once the phone has been paired successfully, this procedure does not need to be repeated, unless the phone is manually deleted from the audio system (see "Deleting a phone") or the vehicle data is deleted from the phone.

- Voice command:

1. Press the button .
2. Say "Setup".
- The system will announce the available commands.
- To skip this information message, press the button again, then a beep will sound.
3. Say "Connect phone".
4. Proceed to the next step.
5. When prompted, say the phone name.
- Use any unique name.
- Full names are used for voice tags.
- Do not use short names or similar voice commands.
6. The Bluetooth® system will repeat the spoken name.
7. Say "Yes" to confirm.
8. The audio system display will show "searching ---- passkey: 0000" and a request to start the phone pairing procedure will be given.
9. Search for the Bluetooth® system on the phone. The model name of your vehicle should appear in the Bluetooth® device list. Attempt to pair with the phone.
10. After successful pairing, the phone will start transferring its contact list/phone numbers to the audio system.
- Depending on the phone model and the number of entries in the phonebook, this process may take from two or three minutes to more than ten minutes.

0000, and a request to initiate the pairing procedure with the phone will be displayed.
9. Search for the bluetooth® system on your phone. The model name of your vehicle should appear in the bluetooth® device list. Attempt to pair the phone.
10. If pairing is successful, the phone will begin transferring the list of numbers/contacts to the audio system.
- This process may take from two or three minutes to more than ten minutes, depending on the phone model and the number of entries in the phonebook.

- Manual operation:

1. In the PHONE menu, select "Pair", then continue from step 5.

NOTE:

• Until the message "Transfer Complete" appears on the audio system display, the Bluetooth® headset function may not operate properly.
• Depending on the phone make and model, the contact list in the phone may not be transferred to the audio system.

NOTE:

If the phone is paired with several vehicles of the same model, i.e., both vehicles are HYUNDAI SOLARIS, some phones may not transmit the correct name of this vehicle via Bluetooth®. In this case, you need to change the name displayed on your phone from Solaris to Solaris1 and Solaris2.
For the relevant instructions, see your phone's owner's manual, or contact your mobile service provider or the phone manufacturer.

• Connecting a phone

After the Bluetooth® system is turned on, the phone used last time is connected automatically. To select another paired phone, use the "Select Phone" menu.

The headset can be connected to only one selected phone at a time.

- Voice command:

1. Press the button.
2. Say "Setup".
3. When prompted by the system, say "Select phone".
- The system will list all registered phone names.
4. Say the name of the desired phone or its number in the list.
5. Say "Yes" to confirm.

- Manual operation:

1. In the "PHONE" menu, select "Select", then select the desired phone from the list.

• Changing priority

If several phones are paired with the audio system, after the Bluetooth® function is turned on, the system attempts to connect to a phone in the following order:

1. Phone with an assigned priority.
2. Phone connected the previous time.
3. Automatic connection is stopped.

- Voice command:

1. Press the button.
2. Say "Setup".
3. When prompted by the system, say "Change priority".
- The system will list all registered phone names.
4. Say the name of the desired phone or its number in the list.
5. Say "Yes" to confirm.

- Manual operation:

1. In the "PHONE" menu, select "Priority", then select the desired phone from the list.

• Deleting a phone

A paired phone can be deleted.

- When a phone is deleted, all information related to it (including the phonebook) is also deleted.
- If you want to use the deleted phone with this audio system again, the pairing procedure must be repeated.

- Voice command:

1. Press the button.
2. Say "Setup".
3. When prompted by the system, say "Delete phone".
- The system will list all registered phone names.
4. Say the name of the desired phone or its number in the list.
5. Say "Yes" to confirm.

- Manual operation:

1. In the "PHONE" menu, select "Delete", then select the desired phone from the list.

• Bluetooth Setup • Language

- Voice command:

In the "Language" menu, select "bT Voice recognition language", select the language by turning the knob(TUNE), and press the knob again to confirm.

- Supported languages:

FRENCH / GERMAN / BRITISH ENGLISH / SPANISH / DUTCH / ITALIAN / DANISH / RUSSIAN / POLISH / SWEDISH.

• Turning Bluetooth® on/off

Bluetooth® system is turned on (oN) or off (oFF) using this menu.

- If the Bluetooth® system is off, the system prompts you to turn on Bluetooth® after any related command is given.

- Voice command:

1. Press the button.
2.Say “Settings”.
3.When prompted by the system, say “Deactivate bluetooth”.
4.Say “Yes” to confirm.
5.For manual operation:

- In the “PHoNE” (PHONE) menu, select “bT off” (Bluetooth off) and, when prompted, say “Yes” to confirm.

- Manual operation:

1. In the “PHoNE” (PHONE) menu, select “bT off” (Bluetooth off) and, when prompted, say “Yes” to confirm.