Phonebook (in the vehicle)

• Adding an entry

Phone numbers and voice tags can be stored. Entries stored in the phone can also be transferred.

• Adding an entry by voice

1. Press the button.
2.Say “Phonebook”.
- The system will announce the available commands.
- To skip this information message, press the buttonagain, then a beep will sound.
3.Say “Add entry”.
4.To continue, say “By voice”.
5.When prompted, say the entry name.
6.Say “Yes” to confirm.
7.When prompted, say the phone number of this entry.
8.When finished entering, say “Save”.
9.Say the phone number type. The following options are available:

“Home”, “Work”, “Mobile”, “Other”, “Default”.
10. To complete adding the entry, say “Yes”.
11. Say “Yes” to save another number for this contact or “Cancel” to finish the procedure.

NOTE

- The system can recognize individual digits from zero to nine, but not large numbers.
- Digits can be entered individually or grouped into strings of a selected length.
- Grouping all digits into a sequence speeds up the entry process.
- It is recommended to enter the numbers in groups, with all dialing numbers as 995 / 734 / 0000
- Each operation is accompanied by the following changes on the display:

Entry example:

1. Say: “Nine, nine, five”
- The display shows: “995”
2. Then say: “Seven, three, four”
- The display shows:

“995734”

• Adding an entry from the phone

1. Press the button.
2.Say “Phonebook”.
3.When prompted, say “Add entry”.
4.To continue, say “From phone”.
5.Say “Yes” to confirm.
6.The phone transfers the list of numbers/contacts to the audio system.
Depending on the phone model and the number of entries in the phonebook, this process may take more than ten minutes.
7.Wait until the message “Transfer Complete” appears on the audio system display.

• Changing a name

Stored names can be changed.

1. Press the button.
2.Say “Phonebook”.
3.When prompted by the system, say “Edit name”.
4.Say the name of the entry (voice tag).
5.Say “Yes” to confirm.
6.Say the new name.

• Deleting a name

Stored names can be deleted.

1. Press the button.
2.Say “Phonebook”.
3.When prompted by the system, say “Delete name”.
4.Say the name of the entry (voice tag).
5.Say “Yes” to confirm.

Calling

• Calling by name

You can call a contact by name stored in the audio system.

1. Press the button.
2.Say “Call”.
3.When prompted, say “Name”.

4.Say the required name (voice tag).
5.Say the required location (phone number type). Only locations that have been stored can be selected.
6.Say “Yes” to confirm and place the call.

• Dialing a number

You can call a contact by saying their number. The system can recognize individual digits from zero to nine.

1. Press the button.
2.Say “Number”.
3.When prompted, say “Number”.
4.Say the digits of the number.
5.Say “Dial” to confirm and place the call.

Receiving a call

When an incoming call is received, a tone sounds through the speakers and the audio system switches to phone mode.

The audio system display shows the message “Incoming call” and the caller's number (if available).

• To answer the call:
- Press the buttonon the steering wheel.
• To reject the call:
- Press the buttonon the steering wheel.
• To adjust the ringtone volume:
- Set the required level using the VOLUME buttons on the steering wheel.
• To transfer the call to the phone (for private conversations):
- Press and hold the buttonon the steering wheel until the audio system transfers the call to the phone.

Talking on the phone

During a call, the message “Active Calls” and the caller's number (if available) are shown on the audio system display.

• To mute the microphone - Press the buttonon the steering wheel.
• To end the call - Press the buttonon the steering wheel.

NOTE

Conditions in which it may be difficult to hear each other:

1. Both parties speak at the same time. In this case, your voice may not reach the other party. (This is not a malfunction.) Speak on the phone in turns.
2. A high Bluetooth® volume level may cause distortion and echo. Keep the Bluetooth® volume level low.
3. Driving on a rough road.
4. Driving at high speed.
5. Open window.
6. Air conditioning vents directed toward the microphone.
7. Increased noise from the air conditioning blower fan.