Body Electrical System

Front Fog Lamp Repair Procedures

7steps
~42min
2/5difficulty
Done 0 of 7

Inspection

Front Fog Light Switch
  1. With the fog lamp switch in each position, check that there is continuity between the terminals below. If continuity is not as specified, replace the multifunction switch.

Removal

  1. Disconnect the negative (-) battery terminal.
  2. Remove the front bumper. (Refer to BD group - "Front Bumper")
  3. Remove the front fog lamp (A) by turning it counterclockwise after disconnecting the connector.
  4. Remove the front fog lamp (A) after loosening the screws.

Installation

  1. Install the front fog lamp bulb.
  2. Connect the front fog lamp connector.
  3. Install the front bumper.

Test yourself

A quick Hyundai Tucson LM quiz: every answer comes with an explanation and a link to the manual page.