Hyundai Tucson LM Quiz
Body Electrical System

High Mounted Stop Lamp Repair Procedures

In this manual: Body Electrical System
General Information — 1Engine Mechanical System — 44Engine Electrical System — 45Emission Control System — 24Engine Control System/Fuel System — 93Clutch System — 13Manual Transmission — 18Automatic Transmission — 87Four-Wheel Drive (4WD) System — 26Drive Shaft and Axle — 29Suspension System — 35Steering — 20Restraints — 47Brake System — 36Body (Interior and Exterior) — 53Body Electrical System — 202Heating, Ventilation, and Air Conditioning — 58
6steps
~36min
2/5difficulty
Done 0 of 6

Removal

High Mounted Stop Lamp

  1. Disconnect the negative (-) battery terminal.
  2. Remove the rear door trim panel. (Refer to BD group - "Rear Door")
  3. Remove the spoiler. (Refer to Group BD - "Back Door")
  4. Remove the high mounted stop lamp assembly (A) after loosening the nuts and the washer nozzle (B).

Installation

  1. Install the high mounted stop lamp and the washer nozzle.
  2. Install the spoiler and the back door trim.

Test yourself

A quick Hyundai Tucson LM quiz: every answer comes with an explanation and a link to the manual page.