Hyundai Tucson LM Quiz
Body Electrical System

Room Lamp Repair Procedures

In this manual: Body Electrical System
General Information — 1Engine Mechanical System — 44Engine Electrical System — 45Emission Control System — 24Engine Control System/Fuel System — 93Clutch System — 13Manual Transmission — 18Automatic Transmission — 87Four-Wheel Drive (4WD) System — 26Drive Shaft and Axle — 29Suspension System — 35Steering — 20Restraints — 47Brake System — 36Body (Interior and Exterior) — 53Body Electrical System — 202Heating, Ventilation, and Air Conditioning — 58
6steps
~36min
2/5difficulty
Done 0 of 6

Inspection

  1. Disconnect the interior lamp connector (A), then check the continuity of the circuit between the terminals.

Removal

  1. Disconnect the negative (-) battery terminal.
  2. Separate the lamp lens (A) from the room lamp using a flat-tip screwdriver.
    Press the lens as shown by the arrow. Be careful not to damage the part (B).
  3. Loosen the fixing screws (2EA).
  4. Remove the interior lamp assembly (A) after disconnecting the connector (B).

Installation

  1. Install the interior lamp unit after connecting the lamp connector.
  2. Install the lamp lens after assembling the lamp.

Test yourself

A quick Hyundai Tucson LM quiz: every answer comes with an explanation and a link to the manual page.