Hyundai Tucson LM Quiz
Body Electrical System

Hazard Warning Switch Repair Procedures

In this manual: Body Electrical System
General Information — 1Engine Mechanical System — 44Engine Electrical System — 45Emission Control System — 24Engine Control System/Fuel System — 93Clutch System — 13Manual Transmission — 18Automatic Transmission — 87Four-Wheel Drive (4WD) System — 26Drive Shaft and Axle — 29Suspension System — 35Steering — 20Restraints — 47Brake System — 36Body (Interior and Exterior) — 53Body Electrical System — 202Heating, Ventilation, and Air Conditioning — 58
6steps
~36min
2/5difficulty
Done 0 of 6

Removal

  1. Disconnect the negative (-) battery terminal.
  2. Remove the hazard warning switch assembly. (Refer to Group BE - "Head Audio Unit")
  3. Disconnect the hazard switch connector (A).
  4. If the hazard warning switch does not meet the specification, replace it carefully, taking care not to damage the hook (A).

Installation

  1. Connect the hazard warning switch connector.
  2. Install the hazard warning switch assembly.

Inspection

  1. Turn on the switch and check the continuity between the terminals using an ohmmeter.

Test yourself

A quick Hyundai Tucson LM quiz: every answer comes with an explanation and a link to the manual page.