SERVICE AND MAINTENANCE
Front/Rear Axle Fluid
In this manual: SERVICE AND MAINTENANCE
~1min read
For normal service, periodic fluid level checks are not required. When the vehicle is serviced for other reasons, the external surfaces of the axle assembly should be inspected. If a gear oil leak is suspected, check the fluid level.
Fluid Level Check
The lubricant should be approximately 1/8 inch (3 mm) below the lower edge of the oil filler hole.
NOTE:
Make sure the vehicle is level and supported on its axles.
Adding Fluid
Add lubricant only through the filler hole and only up to the level specified above.
Lubricant Selection
Use only fluid recommended by FCA.
Test yourself
A quick Jeep Wrangler quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?