Hard Top Components

Four-Door Hard Top Components

1. 1
   Right Side Panel
2. 2
   Left Side Panel
3. 3
   Hard Top

   

Two-Door Hard Top Components

1. 1
   Right Side Panel
2. 2
   Left Side Panel
3. 3
   Hard Top

NOTE:

• All hard top removal and installation instructions apply to both two-door and four-door vehicle models.
• The illustrations shown refer to four-door models, and the appearance of the two-door model components may differ.
• The left side panel must be removed before removing the right side panel.

To remove the hard top front panel(s), perform the following steps:

1. 1
   Fold the sun visor down to the windshield.
2. 2
   Turn the three J-hooks on the left side panel (one at the front, rear and outside), opening them from the roof.

   

   Step Two

3. 3
   Unlatch the left side panel header latch located at the top of the windshield.

   

   Step Three

   1. Header panel latched

   2. Unlatched position

   3. Remove the left side panel.

   4. Repeat the steps above to remove the right side panel.