Interior Light

1. Turn off the engine.

2. Open the tailgate.

3. Remove the service cover using a flat-tip screwdriver.

Tail Lamp/Back-up Lamp (Bulb)

4. Remove the socket from the assembly by turning it counterclockwise until the tabs on the socket align with the grooves in the assembly.

5. Remove the bulb from the socket by pressing it in and turning it counterclockwise until the bulb tabs align with the slots in the socket. Pull the bulb out of the socket. (Back-up lamp: remove the bulb from the socket by pulling it out)

6. Insert the new bulb into the socket and turn it until it locks in place.

7. Install the socket into the assembly by aligning the tabs on the socket with the grooves in the assembly. Insert the socket into the assembly and turn the socket clockwise.

8. Install the service cover by inserting it into the service hole.

Rear Fog Lamp (if equipped)

1. Remove the socket from the assembly by turning the socket counterclockwise until the socket protrusions align with the assembly grooves.

2. Pull the bulb out of the socket.

3. Insert the new bulb into the socket.

4. Install the socket into the assembly by aligning the tabs on the socket with the slots in the assembly and turning the socket clockwise.

5. Install the lamp unit on the vehicle body.

Tail Lamp or Stop Lamp and Tail Lamp (LED)

If the light does not work, we recommend having the system inspected by an authorized Kia dealer.