Exterior Lights

Rear Turn Signal and Stop Lamp/Tail Lamp

1. Turn off the engine.

2. Open the tailgate.

3. Loosen the lamp unit mounting screws using a Phillips screwdriver.

4. Remove the rear combination light from the vehicle body.

5. Remove the socket from the assembly by turning the socket counterclockwise until the protrusions on the socket align with the slots in the assembly.

6. Remove the bulb from the socket by pushing it in and turning it counterclockwise until the tabs on the bulb align with the slots in the socket. Pull the bulb out of the socket.

7. Install the new bulb by inserting it into the socket and turning it until it locks in place.

8. Install the socket into the assembly by aligning the tabs on the socket with the slots in the assembly. Insert the socket into the assembly and turn the socket clockwise.

9. Install the headlamp assembly on the vehicle body.

Stop Lamp and Tail Lamp or Tail Lamp (LED)

If the light does not work, we recommend having the system inspected by an authorized Kia dealer.