Using the Portable Lamp

1. If necessary, the vehicle lamp can be used as a portable lamp after separating it.

2. Press the button (1).

3. Pull out the lamp holder.

4. Press the power switch (2).

❈ If the portable lamp does not turn on, it means that the portable lamp needs to be charged. Insert the lamp holder and charge it again. Charging mode will be activated when the ignition key (or Engine Start/Stop button) is in the ON position or the engine is running.

CAUTION

1. Remove the batteries if they will not be used for a long time.

2. Use only the specified battery.

3. You may use regular batteries (non-rechargeable batteries), but do not use non-rechargeable batteries in charging mode. This may damage the vehicle.

4. Do not place the lamp in water, damp places, or liquid mixtures. This may cause internal battery leakage.

5. When replacing batteries, check the polarity and insert them correctly. The lamp will not charge if the batteries are installed in reverse.

6. Do not mix batteries. The lamp may not charge properly.

7. Do not place the lamp or batteries near fire or heat sources. This may cause internal battery leakage.

8. Do not short-circuit the charging terminals of the portable lamp.

This may cause internal battery leakage or damage to the portable lamp.

9. If the portable lamp does not turn on after charging, replace the batteries.