Kia Forte BD Quiz
Body (Interior and Exterior)

Front Seat Cushion Cover

In this manual: Body (Interior and Exterior)
General Information — 8Maintenance — 32Engine Mechanical System — 47Engine Electrical System — 17Emission Control System — 10Engine Control System/Fuel System — 32Clutch System — 11Manual Transmission — 11DCT (Dual Clutch Transmission) System — 16Drive Shaft and Axle — 8Suspension System — 26Steering — 9Restraints — 11Brake System — 27Body (Interior and Exterior) — 119Body Electrical System — 98Heating, Ventilation, and Air Conditioning — 27
8steps
~48min
3/5difficulty
Done 0 of 8

Components and Component Location

Component Location

1. Front Seat Cushion Cover

Repair Procedures

Replacement

  1. Remove the front seat assembly.

    (Refer to Front Seat - "Front Seat Assembly")

  2. Remove the front seat inner shield cover.

    (Refer to Front Seat - "Front Seat Inner Cover")

  3. Remove the front seat outer shield cover.

    (Refer to Front Seat - "Front Seat Outer Cover")

  4. Disconnect the seat cushion heater connector (A).

  5. Remove the protector (A) from the front seat cushion frame.

    [Front]

    [LH]

    [RH]

    [Rear]

  6. Remove the front seat cushion cover (A) from the front seat cushion frame.

  7. After removing the hook-and-loop fastener (A) and ring clips (B) inside the front seat cushion trim, remove the seat cushion cover (C).

  8. To install, reverse the removal procedure.

Test yourself

A quick Kia Forte BD quiz: every answer comes with an explanation and a link to the manual page.