Front Wheel Speed Sensor

Components and Component Location

Components

Repair Procedures

Removal and Installation

1. 1

   Disconnect the negative battery cable.

2. 2

   Remove the front wheel and tire (A).

   Tightening torque: 107.9–128 N·m

   

3. 3

   Disconnect the front wheel speed sensor (A).

   Tightening torque: 8.8–13.7 N·m

   

4. 4

   Disconnect the front wheel speed sensor brackets (A) by loosening the bolts.

   Tightening torque:

   Bolt (B): 7.8–11.8 N·m

   Bolt (C): 8.8–13.7 N·m

   

5. 5

   Remove the front wheel guard.

   (Refer to Body - "Front Wheel Guard")

6. 6

   Disconnect the connector (A), then remove the front wheel speed sensor.

   

7. 7

   Install in the reverse order of removal.

Inspection

1. 1

   Measure the output voltage between the wheel speed sensor terminal and body ground.

   

2. 2

   Compare the change in the wheel speed sensor output voltage with the normal output voltage change, as shown below.

   

   V_low: 0.59–0.84 V V_high: 1.18–1.68 V Frequency range: 1–2,500 Hz