Limp Home Procedure (Override)

When the ignition key is turned to the ON position, if the immobilizer indicator () turns off after flashing 5 times, the transponder in the ignition key is not registered. You cannot start the engine without performing the limp home procedure. To start the engine, you must enter your password using the ignition switch. Your password is available only from an authorized Kia dealer. Contact an authorized dealer for more information.

The following procedure explains how to enter your password "2345" as an example.

1. Turn the ignition key to the ON position. The immobilizer indicator () will flash 5 times and turn off, indicating the start of the limp home procedure.

2. Turn the ignition key to the ACC position.

3. To enter the first digit (in this example "2"), switch the ignition between ON and ACC twice. Perform the same procedure for the following digits within 3 to 10 seconds (for example, for "3", switch the ignition between ON and ACC 3 times).

4. If all digits are entered successfully, you must start the engine within 30 seconds. If you attempt to start the engine after 30 seconds, the engine will not start and you will need to enter your password again.

After performing the limp home procedure, you must have the ignition key or immobilizer system inspected and repaired by an authorized Kia dealer immediately.