Kia Forte BD Quiz
Body (Interior and Exterior)

Rear Bumper Beam Assembly

In this manual: Body (Interior and Exterior)
General Information — 8Maintenance — 32Engine Mechanical System — 47Engine Electrical System — 17Emission Control System — 10Engine Control System/Fuel System — 32Clutch System — 11Manual Transmission — 11DCT (Dual Clutch Transmission) System — 16Drive Shaft and Axle — 8Suspension System — 26Steering — 9Restraints — 11Brake System — 27Body (Interior and Exterior) — 119Body Electrical System — 98Heating, Ventilation, and Air Conditioning — 27
5steps
~30min
2/5difficulty
Done 0 of 5

Components and Component Location

Component Location

[4 Door]

1. Rear bumper beam assembly

[5 Door]

1. Rear bumper beam assembly

Repair Procedures

Replacement

  1. Remove the rear bumper assembly.

    (Refer to Rear Bumper - "Rear Bumper Assembly")

  2. Disconnect the rear bumper beam mounting wiring harness (A).

    [4 Door]

    [5 Door]

  3. Loosen the mounting bolts and remove the smart key antenna (A).

  4. Remove the rear bumper beam assembly after removing the mounting screws (A).

    [4 Door]

    [5 Door]

  5. To install, reverse the removal procedure.

Test yourself

A quick Kia Forte BD quiz: every answer comes with an explanation and a link to the manual page.