Kia Sorento XM 2011-2023 Repair Manual
Emergency Fastening Device (EFD) Installation
In this manual: Kia Sorento XM 2011-2023 Repair Manual
10steps
~60min
3/5difficulty
Done 0 of 10
- Remove the ignition key from the vehicle.
- Disconnect the negative (-) battery cable and wait at least thirty seconds.
- Install the EFD with the bolt (B).
Tightening torque: 39.2~54 N·m

- Connect the EFD connector (A).
- Install the center pillar trim. (Refer to Body - Interior Trim)
- Install the door scuff trim. (Refer to Body - Interior Trim)
- Insert the seat belt into the anchor pretensioner.
- Attach the EFD cover (A) to the EFD.

- Connect the negative battery cable.
- After installing the EFD, check that the system operates correctly:
A. Turn the ignition ON; the SRS indicator should illuminate for about six seconds and then go off.
Test yourself
A quick Kia Sorento Owner's Manual quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?