Kia Sorento XM 2011-2023 Repair Manual
Removal
In this manual: Kia Sorento XM 2011-2023 Repair Manual
13steps
~78min
4/5difficulty
Done 0 of 13
- Remove the air duct. (Refer to Engine Mechanical System - "Air Cleaner")
- Remove the battery and battery tray. (Refer to Engine Electrical System - "Battery")
- Remove the under cover. (Refer to Engine Mechanical System - "Engine Room Under Cover")
- Drain the engine coolant. (Refer to Engine Mechanical System - 'Engine Coolant')
- Remove the drain plug (A) and reinstall it after draining the ATF completely.
Tightening torque: 38.2 ~ 48 N·m

- Remove the wiring bracket mounting bolt (A).

- Remove the ATF injection hole plug (banjo bolt) (A).

- Disconnect the coolant hose (B) after removing the coolant hose clamp (A).

- Disconnect the hose (B) after removing the automatic transmission fluid cooler hose clamp (A).

- Remove the valve body cover (A).
Tightening torque: (A) 13.7 ~ 15.7 N·m

- Disconnect the solenoid valve connector (B) and the oil temperature sensor connector (A), then remove the bolts (C).
Tightening torque: 9.8 ~ 11.8 N·m

- Remove the solenoid valve support bracket (B) and the valve body mounting bolts (A-1 ea).
Tightening torque: 9.8 ~ 11.8 N·m

- Remove the torque converter control solenoid valve (A).

Test yourself
A quick Kia Sorento Owner's Manual quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?