Cooling Fan Repair Procedures

Inspection

1. 1
   Turn the ignition switch OFF and disconnect the negative (-) terminal of the auxiliary 12V battery.
2. 2
   Connect GDS to the DLC.
3. 3
   Turn the ignition on.
4. 4
   Check the "Duty Control" and signal waveforms according to the "Fan Status" by performing the "Actuation Test" in GDS.

   Cooling Fan Speed	Duty (%)	Fan Speed (rpm)
   0	0	0
   1	10	900
   2	20	1200
   3	30	1500
   4	40	1800
   5	50	2100
   6	60	2450
   7	70	2600
   8	80	2800
   9	90	3000

   
   [Cooling Fan 1st Speed]

   

   [Cooling Fan 2nd Speed]

   

   [Cooling Fan 3rd Speed]

   

   [Cooling Fan 4th Speed]

   

   [Cooling Fan 5th Speed]

   

   [Cooling Fan 6th Speed]

   

   [Cooling Fan 7th Speed]

   

   [Cooling Fan 8th Speed]

   

   [Cooling Fan 9th Speed]

   

   [Cooling Fan Stop]

   

Removal

1. 1
   Turn the ignition switch OFF and disconnect the auxiliary (12V) negative (-) terminal.
2. 2
   Remove the rear seat cushion. (Refer to Body - Rear Seat Assembly)
3. 3
   Loosen the nut (A) and remove the outlet duct protector panel (B). Outlet duct protector panel nut: 7.8 ~ 11.8 N·m

   

4. 4
   Open the trunk.
5. 5
   Remove the parcel shelf (A).

   

6. 6
   Loosen the bolt (A) and remove the cooling outlet duct (B). Cooling outlet duct bolt: 7.8 ~ 11.8 N·m

   

7. 7
   Loosen the nut (A) and remove the cooling fan (B). Cooling fan nut: 7.8 ~ 11.8 N·m

   

Installation

1. Install in the reverse order of removal.