Kia Stinger CK Quiz
Body (Interior and Exterior)

Front Door Latch

In this manual: Body (Interior and Exterior)
General Information — 8Maintenance — 27Engine Mechanical System — 47Engine Electrical System — 19Emission Control System — 12Engine Control System/Fuel System — 51Automatic Transmission System — 34All-Wheel Drive (AWD) System — 7Drive Shaft and Axle — 15Suspension System — 25Steering — 8Restraints — 19Brake System — 22Body (Interior and Exterior) — 47Front Seat Belt — 63Body Electrical System — 99Windshield Wiper/Washer — 11Heating, Ventilation, and Air Conditioning — 32
13steps
~78min
3/5difficulty
010203040505.74N·mlb·ft
Tightening torque found on this page
Done 0 of 13

Components and Component Location

Component Location

1. Front Door Latch

Repair Procedures

Replacement

  1. Remove the front door glass.

    (Refer to Front Door - Front Door Window Glass)

  2. Remove the front door lock cover (A) and cover (B).

  3. Remove the front door lock (A) after loosening the mounting bolt.

    Tightening torque: 3.4 - 5.7 N·m

  4. Remove the front door outside handle (A) by sliding it rearward.

  5. Disconnect the front door outside handle connector (A).

  6. Remove the front door outside handle garnish (A).

  7. Loosen the front door outside handle base mounting screw (A).

  8. Disconnect the outside rear view mirror connector (A).

  9. Disconnect the front door wiring harness main connector (A).

  10. Loosen the front door latch mounting screws (A).

  11. Remove the front door latch (A) after loosening the mounting bolts.

  12. Remove the front door latch (B) after disconnecting the connector (A).

  13. Install in the reverse order of removal.

Test yourself

A quick Kia Stinger CK quiz: every answer comes with an explanation and a link to the manual page.