Front Door Glass

Components and Component Location

Component Location

Repair Procedures

Replacement

1. 1

   Remove the front door trim panel.

   (Refer to Front Door - Front Door Trim Panel)

2. 2

   Remove the front door frame inner cover (A) using a remover.

   

3. 3

   Remove the front door belt inside the weatherstrip (A).

   

4. 4

   Remove the front door glass mounting hole plug (A) from the door module.

   

5. 5

   While holding the power window switch, pull it down until the glass mounting bolt is visible through the plug hole.

6. 6

   Loosen the mounting bolt and remove the front door glass (A) by tilting it to one side.

   Tightening torque: 7.8–11.8 N·m

   

7. 7

   Install in the reverse order of removal.