Automatic Transmission System

Oil Filter

5steps
~30min
2/5difficulty
0102030405024.518N·mlb·ft
Tightening torque found on this page
Done 0 of 5

Components and Component Location

Components

1. Automatic Transmission
2. Valve Body Cover
3. Oil Filter
4. ATF Level Check Tube
5. Drain Plug

Repair Procedures

Removal

  1. Remove the under cover.

    (Refer to Engine Mechanical System - "Under Hood Compartment").

  2. Remove the ATF drain plug (A), allow the fluid to drain, and then reinstall the drain plug.

    Tightening torque: 22.6–24 N·m

  3. Remove the valve body cover.

    1. Loosen all valve body bolts except the bolts (A) at the corner.

      Tightening torque: 13.7 - 15.7 N·m

    2. Loosen the two bolts (A) at the corner. After supporting the valve body cover with a jack, remove the valve body cover by lowering the jack slowly.

Installation

  1. Install in the reverse order of removal.

  2. Fill the automatic transmission with fluid.

    (Refer to Hydraulic System - "Fluid")

Test yourself

A quick Kia Stinger CK quiz: every answer comes with an explanation and a link to the manual page.