Kia Stinger CK Quiz
Front Seat Belt

Rear Bumper Beam Assembly

In this manual: Front Seat Belt
General Information — 8Maintenance — 27Engine Mechanical System — 47Engine Electrical System — 19Emission Control System — 12Engine Control System/Fuel System — 51Automatic Transmission System — 34All-Wheel Drive (AWD) System — 7Drive Shaft and Axle — 15Suspension System — 25Steering — 8Restraints — 19Brake System — 22Body (Interior and Exterior) — 47Front Seat Belt — 63Body Electrical System — 99Windshield Wiper/Washer — 11Heating, Ventilation, and Air Conditioning — 32
4steps
~24min
2/5difficulty
Done 0 of 4

Components and Component Location

Component Location

1. Rear bumper beam assembly

Repair Procedures

Replacement

  1. Remove the rear bumper cover.

    (Refer to Rear Bumper - "Rear Bumper Assembly")

  2. Disconnect the wiring harness from the rear bumper beam mounting.

  3. Remove the mounting clips (A), then remove the rear bumper beam assembly (B).

  4. Install in the reverse order of removal.

Test yourself

A quick Kia Stinger CK quiz: every answer comes with an explanation and a link to the manual page.