Rear Bumper Assembly

Components and Component Location

Component Location

Repair Procedures

Replacement

1. 1

   Remove the rear seat assembly.

   (Refer to Rear Seat - "Rear Seat Assembly")

2. 2

   Remove the rear combination lamp cover (A).

   

3. 3

   Remove the rear combination lamp (A) after loosening the mounting nut and screw.

   

4. 4

   Disconnect the rear combination lamp connector (A).

   

5. 5

   Remove the rear combination lamp reflector (A).

   

6. 6

   Loosen the upper rear bumper mounting and screw.

   

7. 7

   Remove the lower rear bumper (A) after loosening the mounting nut and clips.

   

8. 8

   Separate the bumper side (A) after loosening the mounting screws and clips.

   

9. 9

   Remove the luggage compartment floor covering (A).

   

10. 10

    Remove the center tray (A).

    

11. 11

    Remove the rear cross garnish (A).

    

12. 12

    After loosening the mounting screws, separate the luggage compartment side trim (A).

    

13. 13

    Remove the luggage compartment side trim after disconnecting the luggage compartment lamp connector (A).

    

14. 14

    Remove the mounting bolts of the rear bumper beam.

    [LH]

    

    [RH]

    

15. 15

    Disconnect the rear bumper main connector (A).

    

16. 16

    Remove the rear bumper cover (A).

    

17. 17

    Install in the reverse order of removal.