Kia Stinger CK Quiz
Front Seat Belt

Rear Door Module

In this manual: Front Seat Belt
General Information — 8Maintenance — 27Engine Mechanical System — 47Engine Electrical System — 19Emission Control System — 12Engine Control System/Fuel System — 51Automatic Transmission System — 34All-Wheel Drive (AWD) System — 7Drive Shaft and Axle — 15Suspension System — 25Steering — 8Restraints — 19Brake System — 22Body (Interior and Exterior) — 47Front Seat Belt — 63Body Electrical System — 99Windshield Wiper/Washer — 11Heating, Ventilation, and Air Conditioning — 32
14steps
~84min
4/5difficulty
Done 0 of 14

Components and Component Location

Component Location

1. Rear Door Module

Repair Procedures

Replacement

  1. Remove the rear door window glass.

    (Refer to Rear Door - Rear Door Window)

  2. Remove the hole plug (B), then remove the rear door outside handle cover (A) after loosening the mounting bolt.

  3. Remove the rear door outside handle (A) by sliding it rearward.

  4. Remove the rear door outside handle garnish (A).

  5. Loosen the mounting screw of the rear door outside handle base (A).

  6. Disconnect the rear door main wiring connector (A).

  7. Loosen the mounting screw of the rear door latch (A).

  8. Remove the rear door module (A) after loosening the mounting bolts.

  9. Remove the rear door channel (A) after loosening the mounting bolts.

  10. Remove the rear door latch (B) after disconnecting the latch connector (A).

  11. Remove the rear speaker.

    (Refer to Body Electrical System - Speakers)

  12. Remove the rear power window motor.

    (Refer to Body Electrical System - Power Window Motor)

  13. Remove the rear door wiring harness from the rear door module.

  14. Install in the reverse order of removal.

Test yourself

A quick Kia Stinger CK quiz: every answer comes with an explanation and a link to the manual page.