Kia Stinger CK Quiz
Front Seat Belt

Back Door Glass

In this manual: Front Seat Belt
General Information — 8Maintenance — 27Engine Mechanical System — 47Engine Electrical System — 19Emission Control System — 12Engine Control System/Fuel System — 51Automatic Transmission System — 34All-Wheel Drive (AWD) System — 7Drive Shaft and Axle — 15Suspension System — 25Steering — 8Restraints — 19Brake System — 22Body (Interior and Exterior) — 47Front Seat Belt — 63Body Electrical System — 99Windshield Wiper/Washer — 11Heating, Ventilation, and Air Conditioning — 32
10steps
~60min
3/5difficulty
0102030405011.89N·mlb·ft
Tightening torque found on this page
Done 0 of 10

Components and Component Location

Component Location

1. Rear Door Glass

Repair Procedures

Replacement

  1. Remove the rear door trim.

    (Refer to Rear Door - Rear Door Trim Panel)

  2. Remove the rear door frame inner cover (A) using a puller.

  3. Remove the rear door belt inside weatherstrip (A).

  4. Using a puller, remove the rear door belt outer weatherstrip (A).

  5. Remove the rear door drive channel (A) after loosening the mounting screws.

  6. Remove the rear door frame molding (A) using a puller.

  7. Remove the rear door frame garnish (A) and the glass assembly.

  8. Remove the rear door glass mounting hole plug (A).

  9. Loosen the mounting bolt and remove the rear door glass (B) by tilting it to the side.

    Tightening torque: 7.8–11.8 N·m

  10. Install in the reverse order of removal.

Test yourself

A quick Kia Stinger CK quiz: every answer comes with an explanation and a link to the manual page.