Kia Stinger CK Quiz
Front Seat Belt

Rear Seat Assembly

In this manual: Front Seat Belt
General Information — 8Maintenance — 27Engine Mechanical System — 47Engine Electrical System — 19Emission Control System — 12Engine Control System/Fuel System — 51Automatic Transmission System — 34All-Wheel Drive (AWD) System — 7Drive Shaft and Axle — 15Suspension System — 25Steering — 8Restraints — 19Brake System — 22Body (Interior and Exterior) — 47Front Seat Belt — 63Body Electrical System — 99Windshield Wiper/Washer — 11Heating, Ventilation, and Air Conditioning — 32
8steps
~48min
3/5difficulty
Done 0 of 8

Components and Component Location

Component Location

1. Rear Seat Cushion Assembly
2. Rear Side Seat Assembly [LH]		 3. Rear Seatback Assembly
4. Rear Side Seat Assembly [RH]

Repair Procedures

Replacement

  1. Separate the rear seat cushion assembly (A).

  2. Remove the rear seat cushion assembly after disconnecting the rear seat heater connector (A).

  3. After loosening the mounting bolts, remove the rear side seat (A) by pulling it upward.

  4. Disconnect the rear center seat belt (A) by pressing it into the groove in the direction of the arrow.

  5. Fold the rear seatback assembly (A) forward.

  6. Open the hinge bracket cover (A) after loosening the mounting bolt.

  7. Remove the rear seat back assembly (A).

  8. Install in the reverse order of removal.

Test yourself

A quick Kia Stinger CK quiz: every answer comes with an explanation and a link to the manual page.