Kia Stinger CK Quiz
Steering

Steering Wheel

In this manual: Steering
General Information — 8Maintenance — 27Engine Mechanical System — 47Engine Electrical System — 19Emission Control System — 12Engine Control System/Fuel System — 51Automatic Transmission System — 34All-Wheel Drive (AWD) System — 7Drive Shaft and Axle — 15Suspension System — 25Steering — 8Restraints — 19Brake System — 22Body (Interior and Exterior) — 47Front Seat Belt — 63Body Electrical System — 99Windshield Wiper/Washer — 11Heating, Ventilation, and Air Conditioning — 32
14steps
~84min
3/5difficulty
0204060801004936N·mlb·ft
Tightening torque found on this page
Done 0 of 14

Components and Component Location

Components

1. Steering Wheel Housing
2. Remote Control Switch
3. Paddle Shift
4. Lower Cover		 5. Wiring Harness
6. Damper
7. Upper Cover
8. Upper Cover

Repair Procedures

Removal

  1. Disconnect the negative battery cable from the battery and wait at least 30 seconds.

  2. Turn the steering wheel so the front wheels face straight ahead.

  3. Remove the driver air bag.

    (Refer to "Restraint System - Driver Airbag Module (DAB) and Clock Spring")

  4. Disconnect the steering wheel connector.

  5. Loosen the steering wheel mounting bolt and remove the steering wheel.

    Tightening Torque: 44.1–49 N·m

  6. Install in the reverse order of removal.

Disassembly

  1. Loosen the screw and remove the upper cover.

  2. Loosen the damper screw and remove the damper.

  3. Loosen the paddle shift screw.

  4. Using a screwdriver, disconnect the paddle shift switch connector.

  5. Loosen the remote control switch screw, then separate the remote control switch.

  6. Disconnect the remote control switch connector, then remove the remote control switch and lower cover.

  7. Disconnect the connector, then remove the steering wheel housing.

  8. Install in the reverse order of removal.

Test yourself

A quick Kia Stinger CK quiz: every answer comes with an explanation and a link to the manual page.