Kia Stinger CK Quiz
Suspension System

Wheel

In this manual: Suspension System
General Information — 8Maintenance — 27Engine Mechanical System — 47Engine Electrical System — 19Emission Control System — 12Engine Control System/Fuel System — 51Automatic Transmission System — 34All-Wheel Drive (AWD) System — 7Drive Shaft and Axle — 15Suspension System — 25Steering — 8Restraints — 19Brake System — 22Body (Interior and Exterior) — 47Front Seat Belt — 63Body Electrical System — 99Windshield Wiper/Washer — 11Heating, Ventilation, and Air Conditioning — 32
3steps
~18min
2/5difficulty
04080120160200127.594N·mlb·ft
Tightening torque found on this page
Done 0 of 3

Repair Procedures

Hub Nut Tightening Sequence

Tighten the hub nuts as follows.

Tightening torque: 107.9–128 N·m

Perform inspection

  1. Raise the vehicle.

  2. Measure the wheel runout using a dial indicator as shown below.

    Run out Aluminum
    Radial mm (in) Below 0.3 (0.0118)
    Lateral mm (in) Below 0.3 (0.0118)

  3. If the measured value exceeds the specified value, replace the wheel.

Test yourself

A quick Kia Stinger CK quiz: every answer comes with an explanation and a link to the manual page.