Driving Information Mode

This mode shows 3 types of driving information.

All stored driving information (except the odometer, distance to empty and instant fuel economy) is reset when the battery is disconnected.

1. Distance to Empty (km or miles)

This mode shows the estimated distance the vehicle can be driven with the remaining fuel. When the remaining distance is less than 50 km (30 miles), "---" will be displayed.

The gauge operating range is from 50 to 999 km (from 30 to 999 miles).

2. Average Fuel Economy (L/100 km or miles per gallon)

This mode calculates the average fuel economy from all fuel consumed and the distance driven since the last average fuel economy reset. The total fuel consumption is calculated from the fuel consumption input. For an accurate calculation, drive more than 50 m (0.03 miles).

To reset the average fuel economy to zero (--.-), perform the following steps:

• When "AVG Fuel Economy" in "User Settings" is set to "Auto Reset."

If the vehicle speed exceeds 1 km/h after refueling more than 6 L, the average fuel economy will be reset to zero (---).

• When "AVG Fuel Economy" in "User Settings" is set to "Manual Reset."

PressPress and hold the button for longer than 1 second, while the average fuel economy is displayed, to reset the average fuel economy to zero (--.-).

3. Instant Fuel Economy (L/100 km or miles per gallon)

In this mode, the instant fuel consumption is calculated over the last few seconds.

✽ NOTICE

• If the vehicle is not on level ground or battery power has been interrupted, the "Distance to Empty" function may not operate correctly. The trip computer may not register additional fuel if less than 6 liters (1.6 gallons) of fuel is added to the vehicle.
• Fuel economy and distance to empty may vary significantly depending on driving conditions, driving habits, and vehicle condition.
• Distance to empty is an estimate of the available driving distance. This value may differ from the actual driving distance.