Body Electrical System

Front Fog Lamp Repair Procedures

11steps
~66min
3/5difficulty
Done 0 of 11

Inspection

  1. Disconnect the negative (-) battery terminal.
  2. Remove the lighting switch from the multifunction switch. (Refer to Multifunction Switch)
  3. Using the front fog lamp switch, check for continuity between the terminals below. If the continuity does not match the specification, replace the multifunction switch.
    Fog Lamp

Removal

  1. Disconnect the negative (-) battery terminal.
  2. Remove the front bumper cover. (Refer to Body - "Front Bumper Cover")
  3. Disconnect the front fog lamp connector (A) from the front bumper.
  4. Remove the front fog lamp (A) by turning it counterclockwise.
  5. Remove the front fog lamp assembly (A) after removing the 4 screws.

Installation

  1. Install the front fog lamp and connect the connector.
  2. Install the front fog lamp assembly.
  3. Install the front bumper cover.

Test yourself

A quick Kia Cee'd quiz: every answer comes with an explanation and a link to the manual page.