Body Electrical System
Puddle Lamp Repair Procedures
In this manual: Body Electrical System
13steps
~78min
3/5difficulty
Done 0 of 13
Removal
- Disconnect the negative (-) battery terminal.
- Remove the outside mirror (A) from the mirror holder.

- Disconnect the heater connector (A) and the BSD indicator connector (B) from the mirror.

- Release the retaining clip and remove the outside rearview mirror cover (A).

- Remove the screw.

- Remove the outside rearview mirror lower cover (A), then remove the screws (B).

- Remove the screws from the mirror motor module.


- Disconnect the connector (A) and disconnect the puddle lamp (B).


Installation
- Install the puddle lamp and connector.
- Install the mirror motor module.
- Install the outside mirror under the cover.
- Install the outside rearview mirror cover and mirror.
- Connect the negative (-) battery terminal and check the puddle lamp operation.
Test yourself
A quick Kia Cee'd quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?