Kia Cee'd Quiz
Body Electrical System

Turn Signal Lamp Repair Procedures

In this manual: Body Electrical System
General Information — 15Maintenance — 7Engine Mechanical System — 84Engine Electrical System — 49Emission Control System — 22Fuel System — 95Clutch System — 28Manual Transmission — 21Dual Clutch Transmission (DCT) System — 47Drive Shaft and Axle — 20Suspension System — 36Steering — 23Restraints — 39Brake System — 54Body (Interior and Exterior) — 209Body Electrical System — 254Heating, Ventilation, and Air Conditioning — 56
8steps
~48min
2/5difficulty
Done 0 of 8

Removal

Outside Mirror Turn Signal Lamp
  1. Disconnect the negative (-) battery terminal.
  2. Remove the outside mirror (A) from the mirror holder.
  3. Disconnect the heater connector (A) and the BSD indicator connector (B) from the mirror.
  4. Release the retaining clip and remove the outside rearview mirror cover (A).
  5. Loosen the screw and disconnect the connector (A). Remove the outside rearview mirror turn signal lamp (B).

Installation

Outside Mirror Turn Signal Lamp
  1. Install the outside mirror turn signal lamp onto the outside mirror.
  2. Install the outside mirror.
  3. Connect the negative (-) battery terminal.

Test yourself

A quick Kia Cee'd quiz: every answer comes with an explanation and a link to the manual page.