Kia Cee'd Quiz
Body Electrical System

Room Lamp Repair Procedures

In this manual: Body Electrical System
General Information — 15Maintenance — 7Engine Mechanical System — 84Engine Electrical System — 49Emission Control System — 22Fuel System — 95Clutch System — 28Manual Transmission — 21Dual Clutch Transmission (DCT) System — 47Drive Shaft and Axle — 20Suspension System — 36Steering — 23Restraints — 39Brake System — 54Body (Interior and Exterior) — 209Body Electrical System — 254Heating, Ventilation, and Air Conditioning — 56
12steps
~72min
3/5difficulty
Done 0 of 12

Inspection

Map lamp
  1. Make sure the switch operates correctly after disconnecting the room lamp connector (A).

Removal

Map lamp
  1. Disconnect the negative (-) battery terminal.
  2. Carefully remove the lens (A) from the room lamp using a flat-tip screwdriver.
  3. Replace the bulbs (B) and loosen the screws if necessary.
  4. Remove the room lamp assembly (A) after disconnecting the connector (B).
  5. Disconnect the negative (-) battery terminal.
  6. Remove the vanity lamp (A) by pressing the clip with a small screwdriver.
  7. Remove the vanity mirror lamp assembly (A) after disconnecting the connector.
Vanity lamp

Installation

Map lamp
  1. Connect the connector.
  2. Install the room lamp assembly.
  3. Install the lens.
  4. Reconnect the vanity lamp connector.
  5. Install the vanity lamp.
Vanity lamp

Test yourself

A quick Kia Cee'd quiz: every answer comes with an explanation and a link to the manual page.