Kia Cee'd Quiz
Engine Mechanical System

Intake Manifold Repair Procedures

In this manual: Engine Mechanical System
General Information — 15Maintenance — 7Engine Mechanical System — 84Engine Electrical System — 49Emission Control System — 22Fuel System — 95Clutch System — 28Manual Transmission — 21Dual Clutch Transmission (DCT) System — 47Drive Shaft and Axle — 20Suspension System — 36Steering — 23Restraints — 39Brake System — 54Body (Interior and Exterior) — 209Body Electrical System — 254Heating, Ventilation, and Air Conditioning — 56
11steps
~66min
3/5difficulty
0102030405010.88N·mlb·ft
Tightening torque found on this page
Done 0 of 11

Removal and Installation

  1. Remove the engine cover.
  2. Disconnect the negative battery cable.
  3. Remove the air cleaner assembly. (Refer to Air Intake and Exhaust System - "Air Cleaner").
  4. Disconnect the injector extension connector (A), the VIS (Variable Intake System) connector (B), and the PCSV (Purge Control Solenoid Valve) connector (C).
  5. Disconnect the ETC (Electronic Throttle Control) connector (A) and the MAPS (Manifold Absolute Pressure Sensor) connector (B). (Refer to Fuel System - "ETC System")
  6. Disconnect the knock sensor connector (A).
  7. Disconnect the PCV (Positive Crankcase Ventilation) hose (A) and the PCSV (Purge Control Solenoid Valve) hose (B).
  8. Disconnect the vacuum hose (A) and the throttle body coolant hoses (B).
  9. Remove the bolts securing the filler neck assembly (A).

    Tightening torque: 6.9 ~ 10.8 N·m

  10. Remove the intake manifold (A) with the gasket.

    Tightening torque: 18.6 ~ 24 N·m

  11. Install in the reverse order of removal.

Test yourself

A quick Kia Cee'd quiz: every answer comes with an explanation and a link to the manual page.