Front Wheel Speed Sensor

Components and Component Location

Components

Repair Procedures

Removal and Installation

1. 1

   Disconnect the negative (-) battery cable.

2. 2

   Remove the front wheel and tire.

   (See Suspension System — Wheel)

3. 3

   Remove the front wheel guard.

   (Refer to Body - "Front Wheel Guard")

4. 4

   Disconnect the front wheel speed sensor connector (A), then remove the retaining clip (B).

   

5. 5

   Remove the bolt (A) of the front wheel speed sensor cable bracket.

   Tightening torque: 19.6–29 N·m

   

6. 6

   Loosen the bolt and disconnect the front wheel speed sensor (A).

   Tightening torque: 6.9–10.8 N·m

   

7. 7

   Install in the reverse order of removal.

Inspection

1. 1

   Measure the output voltage between the wheel speed sensor terminal and body ground.

2. 2

   Compare the change in the wheel speed sensor output voltage with the normal output voltage change, as shown below.

   

   V_low: 0.59–0.84 V

   V_high: 1.18–1.68 V

   Frequency range: 1–2,500 Hz

Installation

1. Install in the reverse order of removal.