Driving Your Vehicle
Operating Conditions
In this manual: Driving Your Vehicle
~1min read
• Go to "User Settings" → "Driver Assistance" and select "Rear Cross-Traffic Collision Warning" on the LCD display.
The system will turn on and stand by for activation. If you turn off this function in the cluster, the system will stop.
❈ For more information, refer to "LCD Display" in chapter 4.
✽ NOTICE
- If the vehicle is turned off and then back on, the RCCW system will return to the state it was in immediately before the vehicle was turned off.
- The system activates when the vehicle speed is below 10 km/h and the shift lever is in R (Reverse).
- The detection range of the Rear Cross-Traffic Collision Warning (RCCW) system is approximately 0.5 m ~ 20 m (1 ft ~ 65 ft) toward both sides of the vehicle. An approaching vehicle will be detected if its speed does not exceed 4 km/h ~ 36 km/h.
Note that the detection range may vary under certain conditions. As always, be careful and pay close attention to your surroundings when backing up the vehicle.
Test yourself
A quick Kia Optima DL3 quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?