Checking tyre inflation pressure

1. 1
   After driving about 7 to 10 km (or driving for about 10 minutes), stop in a safe place.
2. 2
   Connect the compressor hose (9) directly to the tyre valve.
3. 3
   Insert the compressor power cable connector into the vehicle's power outlet.
4. 4
   Adjust the tyre inflation pressure to the recommended tyre pressure.

With the ignition switched ON, proceed as follows.

- To increase the inflation pressure: switch on the compressor, position I. To check the current inflation pressure setting, switch off the compressor briefly.

NOTE The gauge may show a higher value than the actual one while the compressor is running.

For an accurate tyre pressure reading, the compressor must be switched off.

- To reduce the inflation pressure: Loosen the threaded cap (8) on the compressor hose.

WARNING - Tyre pressure sensor We recommend using sealant supplied by an authorised Kia dealer for the tyre repair kit. Sealant on the tyre pressure sensor and wheel must be removed when replacing the tyre with a new one, and we recommend having the tyre pressure sensors inspected by an authorised dealer.

Technical data

System voltage: 12 VDC
Operating voltage: 10 - 15 VDC
Current: 15 A maximum

Operating and storage temperature range: -30 ~ +70 °C

Operating pressure: max. 6 bar

Dimensions

Compressor: 170 x 150 x 60 mm

Sealant bottle: ø 85 x 77 mm
Compressor weight: 0.8 kg
Sealant volume: 200 ml